| PART |
Description |
Maker |
| D-108-02 D-108-00 D-108-03 D-108-01 620263-000 |
SOLDERSLEEVE SHIELD TERMINATOR
|
PANDUIT CORP.
|
| 2-1194651-7 |
SOLDERSLEEVE DEVICE SHIELD TERMINATION WITH BRAID
|
Tyco Electronics
|
| C8108 |
6 /C 16 AWG Stranded Tinned Copper, FEP Insulation, Overall Aluminum/Polyester Shield, TC Braid Shield, and FEP Jacket
|
General Cable Technologies Corporation
|
| 621056-000 D-142-50 D-142-52-ND |
(105°C) SOLDERSLEEVE LOW TEMPERATURE
|
PANDUIT CORP.
|
| 371176-000 |
SolderSleeve Wire Splices; D-1744-02 ( Raychem )
|
Tyco Electronics
|
| 624037-000 D-101-35 D-101-33 D-101-34 D-101-36 |
SOLDERSLEEVE* DEVICE WITH PRE-INSTALLED LEAD
|
PANDUIT CORP.
|
| 0746971104 74697-1104 |
2.00mm (.079) Pitch 5-Row VHDM-HSD Backplane Header, Guide Pin Signal Module, Shield Pin End Version, Advanced Mate Shield, 40 Circuits
MOLEX Connector
|
Molex Electronics Ltd.
|
| GRF2.0215.11 GRF2.0212.11 |
Power Entry Module; IEC; Voltage Rating: 250V; Current Rating: 15A; Terminal Type: Quick Connect Solder Tabs; "Lock and shield" snap-in design; Appliance inlet; ECM-shield 10/15A, 125/250VAC, MALE, MAINS POWER CONNECTOR, SOLDER, SOCKET
Power Entry Module; IEC; Voltage Rating: 250V; Current Rating: 15A; Terminal Type: Quick Connect Solder Tabs; "Lock and shield" snap-in design; Appliance inlet; line filter; ECM-shield
|
SCHURTER AG
SCHURTER INC
|
| 1841250P0H5556 1841250P05556 1841250P1H5556 |
TELECOM AND DATACOM CONNECTOR, PLUG
PLUG C-TEL SHIELD 0.85 x 160 GRID
PLUG C-TEL, SHIELD .085 X .160 GRID C PRESS CONNECTOR
|
WINCHESTER ELECTRONICS CORP
Winchester Electronics ...
|
| 2673004701 |
73 SHIELD BEAD
|
Fair-Rite Products Corp.
|
